HPE 3600-48 v2 EI Switch - Switch - L4 - managed - 48 x 10/100 + 4 x Gigabit SFP + 2 x shared 10/100/1000 - rack-moun…

Category: Network switches
  $1,474.00
 
Quantity:
Add to Cart Print
 

View all Network switches by Hewlett Packard Enterprise >>


Product Id: 27365365

Description: HPE 3600-48 v2 EI Switch - Switch - L4 - managed - 48 x 10/100 + 4 x Gigabit SFP + 2 x shared 10/100/1000 - rack-mountable - remarketed

Mfr Part #: JG300AR

MSRP: $2,257.00

The HP 3600 EI switch series delivers premium levels of intelligent and resilient performance, security, and reliability for robust switching at the enterprise network edge. Secure, resilient connectivity and the latest traffic-prioritization technologies enhance converged networks. Designed for increased flexibility and scalability, HP 3600 EI series switches come with 48 10/100 ports, four active SFP-based Gigabit Ethernet ports for stacking and uplinks, and a 48-port 100Base-FX switch with two/four Gigabit Ethernet SFP slots.
Key Points
  • Robust switching at the enterprise network edge
  • Advanced Layer 3 and multicast routing
  • IRF-automated stack and switching fabric setup
  • Integrated and distributed security enforcement
  • Enterprise-level nonblocking performance
  • Broadcast control
  • Advanced classifier-based QoS
  • Powerful QoS feature
  • Friendly port names
  • Remote configuration and management
  • Manager and operator privilege levels
  • Command authorization
  • Secure web GUI
  • Multiple configuration files
  • Complete session logging
  • SNMPv1, v2c, and v3
  • Local and remote intelligent mirroring
  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
  • Management VLAN
  • Device Link Detection Protocol (DLDP)
  • Remote intelligent mirroring
  • IPv6 management
  • Auto-MDIX
  • Jumbo packet support
  • Gigabit uplinks
  • High-density access
  • IEEE 802.3af Power over Ethernet (PoE)
  • Ethernet OAM
  • IEEE 802.3at Power over Ethernet (PoE+) support
  • Gigabit Ethernet interface
  • Nonblocking performance
  • Hardware-based wire-speed access control lists
  • Separate data and control paths
  • External redundant power supply
  • Smart link
  • Spanning Tree/MSTP, RSTP
  • Virtual Router Redundancy Protocol (VRRP)
  • Intelligent Resilient Framework (IRF)
  • IEEE 802.3ad Link Aggregation Control Protocol (LACP)
  • RMON (remote monitoring)
  • VLAN support and tagging
  • GARP VLAN registration protocol
  • IEEE 802.1ad QinQ and Selective QinQ
  • Gigabit Ethernet port aggregation
  • Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) protocol snooping
  • Address Resolution Protocol (ARP)
  • Dynamic Host Configuration Protocol (DHCP)
  • Loopback interface address
  • User Datagram Protocol helper function
  • Route maps
  • IPv4 routing protocols
  • IPv6 routing protocols
  • Equal-Cost Multipath (ECMP)
  • PIM-SSM, PIM-DM, and PIM-SM (for IPv4 and IPv6)
  • Multicast Source Discovery Protocol (MSDP)
  • Bidirectional Forwarding Detection (BFD)
  • IGMPv1, v2, and v3
  • IPv6 tunneling
  • Access control lists (ACLs)
  • Multiple user authentication methods
  • Identity-driven security and access control
  • Secure management access
  • Secure FTP
  • Guest VLAN
  • Endpoint Admission Defense (EAD)
  • Port security
  • Port isolation
  • ICMP throttling
  • STP BPDU port protection
  • STP root guard
  • DHCP protection
  • Dynamic ARP protection
  • IP source guard helps prevent IP spoofing attacks
  • RADIUS/HWTACACS
  • Multiple Customer Edge (MCE)
  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
  • LLDP-MED
  • LLDP-CDP compatibility
  • PoE allocations
  • Voice VLAN
  • IP multicast snooping and data-driven IGMP
  • Protocol Independent Multicast (PIM)
  • Multicast Source Discovery Protocol (MSDP)
  • Multicast VLAN
  • Green initiative support
  • Green IT and power
Product Features
  • Broadcast control
    It allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic.
  • Advanced classifier-based QoS
    It classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port or per-VLAN basis.
  • Powerful QoS feature
    It supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), and WRED.
  • Manager and operator privilege levels
    It enables read-only (operator) and read-write (manager) access on CLI and web browser management interfaces.
  • Command authorization
    It leverages HWTACACS to link a custom list of CLI commands to an individual network administrator's login; also provides an audit trail.
  • Local and remote intelligent mirroring
    It mirrors traffic from a switch port or to a remote switch port anywhere on the network, or mirrors ACL selected traffic to local switch port.
  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
    Automated device discovery protocol provides easy mapping by network management applications.
  • Management VLAN
    It segments traffic to and from management interfaces, including CLI/telnet, a Web browser interface, and SNMP.
  • Device Link Detection Protocol (DLDP)
    It monitors cable between two switches and shuts down the ports on both ends if the cable is broken, preventing network problems such as loops.
  • Troubleshooting
    Ingress and egress port monitoring enable network problem solving; virtual cable tests provide visibility into cable problems
  • sFlow (RFC 3176)
    It provides scalable ASIC-based wire-speed network monitoring and accounting with no impact on network performance; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes.
  • Remote intelligent mirroring
    It mirrors ingress/egress ACL-selected traffic from a switch port or VLAN to a local or remote switch port anywhere on the network.
  • IPv6 management
    Future-proofs networking, as the switch is capable of being managed whether the attached network is running IPv4 or IPv6; supports pingv6, tracertv6, Telnetv6, TFTPv6, DNSv6, syslogv6, FTPv6, SNMPv6, DHCPv6, and RADIUS for IPv6.
  • Auto-MDIX
    It automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports.
  • Jumbo packet support
    It supports up to 9216-byte frame size to improve performance of large data transfers.
  • Gigabit uplinks
    Dual-personality ports for either 10/100/1000 or mini-GBIC SFP connectivity for increased connectivity flexibility.
  • IEEE 802.3af Power over Ethernet (PoE)
    It provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras.
  • Ethernet OAM
    It provides a Layer 2 link performance and fault detection monitoring tool, which reduces failover and network convergence times.
  • IEEE 802.3at Power over Ethernet (PoE+) support
    It simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location.
  • Nonblocking performance
    Up to 17.6 Gbps nonblocking switching fabric provides wire-speed switching with up to 13.1 million pps throughput.
  • Hardware-based wire-speed access control lists
    Feature-rich ACL implementation helps ensure high levels of security and ease of administration without impacting network performance.
  • Separate data and control paths
    It keeps control separated from services and keeps service processing isolated; increases security and performance.
  • Virtual Router Redundancy Protocol (VRRP)
    It allows a group of routers to dynamically back each other up to create highly available routed environments.
  • Dynamic Host Configuration Protocol (DHCP)
    It simplifies the management of large IP networks and supports client and server; DHCP Relay enables DHCP operation across subnets.
  • Loopback interface address
    It defines an address in Routing Information Protocol (RIP) and OSPF that can always be reachable, improving diagnostic capability.
  • User Datagram Protocol helper function
    It allows User Datagram Protocol (UDP) broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents server spoofing for UDP services such as DHCP.
  • Route maps
    It provides more control during route redistribution; allow filtering and altering of route metrics.
  • Equal-Cost Multipath (ECMP)
    It enables multiple equal-cost links in a routing environment to increase link redundancy and scale bandwidth.
  • PIM-SSM, PIM-DM, and PIM-SM (for IPv4 and IPv6)
    It support IP Multicast address management and inhibition of DoS attacks.
  • Multicast Source Discovery Protocol (MSDP)
    It's used for inter-domain multicast applications, allowing multiple PIM-SM domains to interoperate.
  • Bidirectional Forwarding Detection (BFD)
    It enables link connectivity monitoring and reduces network convergence time for RIP, OSPF, BGP, IS-IS, VRRP, and IRF.
  • IPv6 tunneling
    It allows a smooth transition from IPv4 to IPv6 by encapsulating IPv6 traffic over an existing IPv4 infrastructure.
  • Access control lists (ACLs)
    It provides IP Layer 2 to Layer 4 traffic filtering; supports VLAN ACL and port ACL.
  • Secure FTP
    It allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file.
  • Guest VLAN
    It's similar to IEEE 802.1X, it provides a browser-based environment to authenticated clients.
  • Port security
    It allows access only to specified MAC addresses, which can be learned or specified by the administrator.
  • Port isolation
    It secures and adds privacy, and prevents malicious attackers from obtaining user information.
  • ICMP throttling
    It defeats ICMP denial-of-service attacks by enabling any switch port to automatically throttle ICMP traffic.
  • STP BPDU port protection
    It blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks.
  • DHCP protection
    It blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks.
  • Dynamic ARP protection
    It blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data.
  • RADIUS/HWTACACS
    It eases switch management security administration by using a password authentication server.
  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
    It is an automated device discovery protocol that provides easy mapping of network management applications.
  • LLDP-MED
    It is a standard extension that automatically configures network devices, including LLDP-capable IP phones.
  • LLDP-CDP compatibility
    It receives and recognizes CDP packets from Cisco's IP phones for seamless interoperation.
  • PoE allocations
    It supports multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user specified) to allocate PoE power for more efficient energy savings.
  • Voice VLAN
    It automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance.
  • Multicast Source Discovery Protocol (MSDP)
    It is used for inter-domain multicast applications, allowing multiple PIM-SM domains to interoperate.
  • Multicast VLAN
    It allows multiple VLANs to receive the same multicast traffic, reducing network bandwidth demand by eliminating multiple streams to each VLAN.
  • Green IT and power
    It uses the latest advances in silicon development and shuts off unused ports to improve power efficiency.