Product Id: 27182152
Description: Perle eXP-4S110E-TB-XT - Network extender - 100Mb LAN, Ethernet over VDSL2 - 10Base-T, 100Base-TX - up to 100 m
Mfr Part #: 06004900
Perle eXP-S110 PoE Fast Ethernet Extenders transparently extend Ethernet beyond the general IEEE 802.3af limits of 328 feet/100 m while providing Power over Ethernet (PoE) to standards-based compliant devices such as IP cameras, VoIP phones and wireless access points.
These simple and effective point to point Ethernet Copper Extenders are perfect for commercial buildings, residential units, hospitality environments, and connecting a remote office or private-network backbone to a corporate LAN anywhere you need 10/100 Ethernet communication links for PoE devices up to 10,000 feet (3 km) in distance.
- Power remote PoE devices across 2-wire twisted pair or coaxial cable
- On-board PoE power controller for true compatibility with IEEE 802.3at standard
- Hi-Speed - up to 200 Mbps aggregate line rate
- Transparent operation for all Ethernet protocols including 802.1Q VLAN packets and IP video compression schemes
- Link pass-through, interlink fault feedback
- Auto-MDIX and loopback, remote PD power reset
- Plug and Play - auto configuration of VDSL
- Hi-speed performance
Utilizes second generation VDSL2 technology (ITU-T Recommendation G.993). When operating under "Profile 30a", Perle Ethernet Extenders can provide an aggregate VDSL line rate capability of up to 200 Mbps.
- Plug and Play operation
Perle Ethernet Extenders will automatically configure your VDSL interlink connection. The CO/CPE peer association will be determined automatically by the Ethernet Extender. No need to set CO/CPE VDSL pairing. Once a connection is made, both ends will automatically adjust relevant VDSL parameters to optimize the level of bandwidth possible across the copper link.
- Interlink fault feedback
Similar to the link pass-through feature, a loss of VDSL link will drop the 10/100/1000 Ethernet port on each end until the link recovers.
The Ethernet Extender supports auto negotiation on the 10/100/1000Base-T interface.
Auto-MDIX (Automatic Medium-Dependent Interface crossover) detects the signaling on the 10/100/1000 Ethernet RJ45 interface and determines the type of cable connected (straight-through or crossover) and automatically adopts a compatible pin-out.
- Fixed speed and duplex
Some Ethernet equipment require a fixed speed and duplex be used or cannot auto-negotiate. By disabling Auto-Negotiation on the Ethernet Extender, a fixed speed of 10 or 100 Mbps as well as Full or half Duplex can be configured through DIP switches.
- Transparent to IP Video compression protocols
Fully transparent to such IP video compression schemes such as MPEG-4, H.264 and MJPEG.
- Power strain relief strap
A strain relief strap is provided to ensure a solid and secure power connection to the Ethernet Extender. Ideal for areas that may be exposed to vibration.
When enabled, will perform a loopback on the copper VDSL interlink.