Product Id: 27182130
Description: Perle Gigabit Ethernet PoE Ethernet Extender eXP-4S1110L-BNC-XT - Network extender - 100Mb LAN, Ethernet over VDSL2 - 10Base-T, 100Base-TX - 4 ports - up to 3 km
Mfr Part #: 06004560
Perle eXP-S1110 PoE Gigabit Ethernet extenders transparently extend Ethernet beyond the general IEEE 802.3af limits of 328 feet/100 m while providing Power over Ethernet (PoE) to standards-based compliant devices such as IP cameras, VoIP phones and wireless access points. This technology enables users to transparently extend up to four 10/100/1000 Power over Ethernet connections across copper wiring.
At the central site, the 10/100/1000 Ethernet Extender has full PoE support and operates as a powered device (PD) under IEEE 802.3af supporting end-span and mid-span power sources (PSE). The PoE Ethernet extender at the central site then transmits power over the copper wire to power the remote PoE Ethernet extender and attached PD. The remote PoE Ethernet extenders are classified as power sourcing equipment (PSE). While using standard UTP cables that carry Ethernet data, Perle eXP-S1110 PoE Ethernet extenders provide up to 15.4 watts of power to Powered Devices (PDs).
The simple and effective point to point Ethernet copper extender is perfect for commercial buildings, residential units, hospitality environments, and connecting a remote office or private-network backbone to a corporate LAN anywhere you need 10/100/1000 Ethernet communication links for PoE devices up to 10000 feet (3 km) in distance.
- Provides power over VDSL Link
- 4 port 10/100/1000Base-T (RJ-45)
- BNC interlink (VDSL2) connector
- On-board PoE power controller
As a fully compliant IEEE 802.3af PSE end-span device, this Ethernet extender's PoE power controller provides compliant power provisioning and monitoring, properly sensing through signature detection whether or not the attach Ethernet devices are PoE capable or not. This provides a safe connection for both PoE and non-PoE capable devices.
- PSE status indicator
A multi-color LED provided presents the status of the PSE function for easy troubleshooting of power over Ethernet connections.
- Power multiplier selection
When used with 4-pair cable such as CAT5 on the VDSL Interlink port, an internal strap selection on the Ethernet extender will provide VDSL transmission data on 1 pair and power across the 3 other pairs enabling even greater distances for power transmission to be achieved.
- High-speed performance
It is utilizes second generation VDSL2 technology, when operating under "profile 30a", Perle Ethernet extenders can provide an aggregate VDSL line rate capability of up to 200 mbps.
- Plug and Play operation
Perle Ethernet extenders will automatically configure your VDSL interlink connection. The CO/CPE peer association will be determined automatically by the Ethernet extender. No need to set CO/CPE VDSL pairing. Once a connection is made, both ends will automatically adjust relevant VDSL parameters to optimize the level of bandwidth possible across the copper link.
The Ethernet extender supports auto negotiation on the 10/100/1000Base-T interface.
Auto-MDIX (automatic medium-dependent interface crossover) detects the signaling on the 10/100/1000 Ethernet RJ45 interface and determines the type of cable connected (straight-through or crossover) and automatically adopts a compatible pinout.
- Transparent to IP video compression protocols
Fully transparent to such IP video compression schemes such as MPEG-4, H.264 and MJPEG.
- Power strain relief strap
A strain relief strap is provided to ensure a solid and secure power connection to the Ethernet extender, ideal for areas that may be exposed to vibration.