Product Id: 25655484
Description: Perle S-1110P-SFP-XT - Fiber media converter - 10Base-T, 100Base-TX, 1000Base-T, 1000Base-X, 100Base-X - SFP (mini-GBIC) / RJ-45 - up to 100 m
Mfr Part #: 05090560
Perle's feature rich gigabit rate converting PoE media converters transparently connect copper to fiber while providing Power over Ethernet (PoE) to standards-based PoE compliant devices such as IP cameras, VoIP phones and wireless access points.
Perle PoE media converters are classified as Power Sourcing Equipment (PSE). While using standard UTP cables that carry Ethernet data, Perle PoE media converters can also provide power to one or two Powered Devices (PDs).
Perle 10/100/1000 PoE Ethernet to fiber converters provides an economical path to extend the distance of an existing network with fiber cabling. At the same time they function as PoE injectors to power devices like IP phones, video conferencing equipment, IP cameras and Wi-Fi devices over copper UTP cabling.
- 10/100/1000Base-T to 100/1000Base-X fiber
- Compatible with legacy pre-standard PoE devices
- Fix fiber ports or empty slot for Cisco and other industry standard SFPs
- Advanced features: PD reset, fiber redundancy, smart link pass-through, fiber fault alert, auto-MDIX and loopback
- Auto-negotiation (802.3u)
The media converter supports auto negotiation. The 1000Base-X fiber interface negotiates according to 802.3 clauses 37. The 10/100/1000Base-T negotiates according to 802.3 clauses 28 and 40. The 1000Base-X will link up with its partner after the Highest Common Denominator (HCD) is reached and the copper has linked up with its partner. The 1000Base-X will continue to cycle through negotiation transmitting a remote fault of offline until the copper is linked up and the HCDs match. The media converter supports auto-negotiation of full duplex, half duplex, remote fault, full duplex pause, asymmetric pause and Auto MDI-X.
Auto-MDIX (Automatic Medium-Dependant Interface Crossover) detects the signaling on the copper Ethernet interface to determine the type of cable connected and automatically configures the connection when enabled. The media converter can also correct for wires swapped within a pair. The media converter will adjust for up to 120ns of delay skew between the 1000Base-T pairs.
- Smart link pass-through
When the link mode switch is placed into smart link pass-through mode, the copper Ethernet port will reflect the state of the 1000Base-X media converter port. This feature can be used whether fiber auto-negotiation is enabled or disabled.
- Fiber fault alert
With fiber fault alert the state of the 1000Base-X receiver is passed to the 1000Base-X transmitter. This provides fault notification to the partner device attached to the 1000Base-X interface of the media converter. If the 1000Base-X transmitter is off as a result of this fault it will be turned on periodically to allow the condition to clear should the partner device on the 1000Base-X be using a similar technique. This eliminates the possibility of lockouts that occur with some media converters.
- Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. The media converter supports pause negotiation on the 10/100/1000Base-T connection and 1000Base-X fiber connection.