Product Id: 25403971
Description: Transition Stand-Alone 4x T1/E1/J1 Copper to Fiber Transport Mux - Multiplexor - external - T-1/E-1/J-1
Mfr Part #: S4TEF1014-120-NA
These products offer a low cost transport capability for four T1/E1/J1 lines and one RS232 data channel line. The offering will provide copper connections compatible with G.703 and AMI/B8ZS/HDB3; while the optical connection will run at 155 Mbps. A hardware-based solution guarantees the constant bit rate of TDM transport without requiring traffic management. The product provides physical layer status monitoring and alarm classification functions for Telecom operators to manage their fiber optic network and reduce operation and maintenance costs.
- Remote management
- Local and remote loopback
- LEDs for each data port
- DIP switches for line code, line length, local loopback or remote loopback
- T1/E1 mode switch
- Dry relay contacts on each TDM port
- Local (AUX) management interface (RS232 connector)
- Access to complete status information on local and remote device
- Access to local and remote configuration
- Automatic link restoration
Transition Networks's converters will automatically re-establish link in all network conditions.
This feature puts a converter in a special mode that enables the device to loop back the signal from the RX port to the TX port on either media for testing and troubleshooting purposes. Loopback can be either local or remote depending on the location of the converter in the link.
- Remote management
All chassis-based converters from Transition Networks can be managed through SNMP. While chassis based products are generally placed in the telecommunications room, standalone converters are generally placed in remote locations away from network administrators. Remote in-band management over fiber allows administrators access to the remote device to check status and enable/disable features or the device itself.