Product Id: 23706036
Description: Perle S-1110DP-S1SC20U - Fiber media converter - GigE - 10Base-T, 100Base-TX, 1000Base-T, 1000Base-BX - SC single-mode / RJ-45 - up to 20 km - 1310 (TX) / 1490 (RX) nm
Mfr Part #: 05082164
Perle's feature rich Gigabit rate converting PoE media converters transparently connect copper to fiber while providing Power over Ethernet (PoE) to standards-based PoE compliant devices such as IP cameras, VoIP phones and wireless access points.
Perle 10/100/1000 PoE ethernet to fiber converters provide an economical path to extend the distance of an existing network with fiber cabling. At the same time they function as PoE injectors to power devices like IP phones, video conferencing equipment, IP cameras and Wi-Fi devices over copper UTP cabling.
Network administrators can "see-everything" with Perle's advanced features such as auto-negotiation, auto-MDIX, link pass-through, fiber fault alert, and loopback. This allows for more efficient troubleshooting and less on-site maintenance.
- Supplies IEEE 802.3 PoE PSE power
- Compatible with legacy pre-standard PoE devices
- Advanced features: PD reset, fiber redundancy, smart link pass-through
- Fiber fault alert, auto-MDIX and loopback
- PD power reset
Ideal for remotely resetting equipment, this configurable function performs a momentary power reset to the attached Powered Device (PD). When enabled, the media converter will, upon loss of fiber RX, turn off PSE output power supplied to the PD device for 2 seconds then turn the power back on and leave it on until such time that another fiber RX link is lost (after it was re-established). When disabled, a loss of fiber RX has no effect on PSE power to the PD device(s).
Auto-MDIX (automatic medium-dependant interface crossover) detects the signaling on the copper Ethernet interface to determine the type of cable connected and automatically configures the connection when enabled. The media converter can also correct for wires swapped within a pair.