Product Id: 22834824
Description: Perle S-1000MM-S2SC70 - Media converter - GigE - 1000Base-SX, 1000Base-ZX - SC multi-mode / SC single-mode - up to 70 km - 850 nm / 1550 nm
Mfr Part #: 05060284
Perle's feature rich S-1000MM gigabit fiber to fiber media converter enables transparent fiber extension of 1000Base-SX multimode fiber to 1000Base-ZX single mode fiber. Perle's advanced features make the end to end fiber link completely transparent. This allows for more efficient troubleshooting and less on-site maintenance.
- 1000Base-SX to 1000Base-X fiber to fiber media converter
- Signal regeneration prevents signal degradation
- Smart link pass-through, fiber fault alert, loopback for each fiber connection
- Smart link pass-through
When the link mode switch is placed into smart link pass-through mode, the 1000Base-X link on one port will reflect the state of the other 1000Base-X media converter port. This feature can be used whether fiber auto-negotiation is enabled or disabled.
- Fiber fault alert
With fiber fault alert the state of the 1000Base-X receiver is passed to the 1000Base-X transmitter. This provides fault notification to the partner device attached to the 1000Base-X interface of the media converter. If the 1000Base-X transmitter is off as a result of this fault it will be turned on periodically to allow the condition to clear should the partner device on the 1000Base-X be using a similar technique. This eliminates the possibility of lockouts that occur with some media converters.
- Signal regeneration
Signal regeneration maintains signal integrity and allows for maximum fiber to fiber connections without degradation.
Media converters can be cascaded. Two or more media converters can be chained in a link to achieve even greater distances.
- Pause (IEEE 802.3x)
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. The media converter is transparent to pause frames.