Product Id: 22834803
Description: Perle S-100MM-S2ST40 - Media converter - 100Mb LAN - 100Base-FX, 100Base-EX - ST multi-mode / ST single-mode - up to 40 km - 1310 nm
Mfr Part #: 05060074
Perle's feature rich S-100MM fast Ethernet fiber to fiber media converter enables transparent fiber extension of 100Base-FX multimode fiber to 100Base-EX single mode fiber. Perle's advanced features make the end to end fiber link completely transparent. This allows for more efficient troubleshooting and less on-site maintenance.
- 100Base-FX to 100Base-X fiber to fiber media converter
- Signal regeneration prevents signal degradation
- Link pass-through, far-end fault
- Loopback for each fiber connection
- Link pass-through
When enabled, the state of the receiver on one 100Base-X interface is reflected on the other 100Base-X fiber transmitter. If disabled, the 100Base-X fiber interfaces operate independently. Far-end fault indication on the 100Base-X fiber interface has no effect on the other interface.
- Far-End Fault (FEF)
When enabled, the media converter transmits the far-end fault indication over the fiber connection whenever a receive failure is detected. The media converter continuously monitors the fiber connection and clears the far-end fault indication condition when a valid signal is received.
- Signal regeneration
Signal regeneration maintains signal integrity and allows for maximum fiber to fiber connections without degradation.
Media converters can be cascaded. Two or more media converters can be chained in a link to achieve even greater distances.
- Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. The fast Ethernet media converter supports pause negotiation on the 100Base-TX copper connection.