Product Id: 22053800
Description: Perle CM-1110-S2SC70 - Fiber media converter - GigE - 10Base-T, 1000Base-ZX, 100Base-TX, 1000Base-T - RJ-45 / SC single-mode - up to 70 km - 1550 nm
Mfr Part #: 05052650
Installed in a high density Perle media converter chassis, Perle's line of feature rich managed 10/100/1000 rate converting media converters transparently connect copper to fiber. Perle's 10/100/1000 Ethernet to fiber converters provide an economical path to extend the distance of an existing network, the life of non-fiber based equipment, or the distance between two devices.
Network administrators can "see-everything" with Perle's advanced features such as auto-negotiation, auto-MDIX, link pass-through, fiber fault alert, and loopback. Along with a media converter management module in the chassis, configuration and monitoring of the copper and fiber ports can be performed.
- 10/100/1000Base-T to 1000Base-X media converters
- Connects 10/100 devices to gigabit backbone
- Advanced features - smart link pass-through, fiber fault alert, auto-MDIX and loopback
- High density applications with Perle media converter chassis
Auto-MDIX detects the signaling on the copper Ethernet interface to determine the type of cable connected and automatically configures the connection when enabled. The media converter can also correct for wires swapped within a pair.
- Backup and restore
It provides fast and easy module replacement. Management module will always save a copy of the media converter configuration and will restore this configuration automatically to the media module when it is detected in the slot.
- Detailed port statistics
To assist in troubleshooting copper and fiber links, an extensive list of ingress and egress counters for both copper and fiber ports are available. These statistics can be viewed locally via the management module or from a central SNMP NMS on the network.
- Auto-negotiation (802.3u)
The 1000Base-X will link up with its partner after the high common denominator (HCD) is reached and the copper has linked up with its partner. The 1000Base-X will continue to cycle through negotiation transmitting a remote fault of offline until the copper is linked up and the HCDs match.
- Smart link pass-through
When the link mode switch is placed into smart link pass-through mode, the copper Ethernet port will reflect the state of the 1000Base-X media converter port. This feature can be used whether fiber auto-negotiation is enabled or disabled.
- Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. The media converter supports pause negotiation on the 10/100/1000Base-T connection and 1000Base-X fiber connection.