APC SurgeArrest Panelmount with Disconnect and Surge Counter, Modular - surge suppressor

Category: Surge suppressers
  $2,436.00
 
Quantity:
Add to Cart Print
 

View all Surge suppressers by APC by Schneider Electric >>


Product Id: 18519649

Description: APC SurgeArrest Panelmount with Disconnect and Surge Counter, Modular - Surge protector - AC 277/480 V - 3-phase - gray

Mfr Part #: PMG4DS-A

MSRP: $2,950.00

APC’s Commercial/Industrial Surge Suppressors provide protection for your commercial facility, industrial building and data center from damaging power surges and spikes. These TVSS (transient voltage surge suppression) units can be installed at your service entrance and electrical panels throughout your facility. They protect against severe voltage spikes caused by lighting and utility accidents, as well as smaller, far more frequent surges caused by normal everyday operation of motors, pumps and other large equipment inside your facility. They come in modular (replaceable surge suppression modules) and nonmodular designs, and feature the latest industry approvals and safety ratings.
Key Points
  • Lightning and Surge Protection
  • Protection Working Indicator
  • Audible failure alarm
  • Replaceable individual phase modules
  • Manual disconnect switch
  • Surge counter
  • Themal overload protection
  • NEMA 3R/12 enclosure
  • Noise Filtering
  • Alarm contacts
Product Features
  • Audible failure alarm
    Calls attention to a damaged surge suppressor, identifying the need for service. Reduces the time protected equipment is at risk due to compromised surge suppression.
  • Thermal overload protection
    Prevents thermal run-away when metal oxide varistors (MOVs) become damaged, or when a continuous overvoltage condition exists.
  • Manual disconnect switch
    Enables the surge suppressor to be de-energized for service without disconnecting the protected load.
  • Surge counter
    Records the number of power surges the unit is exposed to which can be used as an indicator that the unit is providing protection as intended. A high number of surges can be an indicator of poor facility power quality and the need for additional corrective actions
  • NEMA 3R/12 enclosure
    Meets the requirements of a NEMA 3R enclosure for outdoor applications, and a NEMA 12 enclosure for indoor applications.
  • Alarm contacts
    Enables remote monitoring of TVSS alarm status.
  • Replaceable individual phase modules
    Significantly reduces the time to repair a damaged surge protector, minimizing the time that critical loads are unprotected from transients.
  • Protection Working Indicator
    SurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.
  • Noise Filtering
    Attenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.
  • Lightning and Surge Protection
    To prevent damage to your equipment from electric power surges and spikes.