Tripp Lite UPS 1000VA 700W Battery Back Up Tower Isolation Transformer 120V - UPS - 700 Watt - 1000 VA

Tripp Lite's OMNI1000ISO offers complete UPS protection with built-in line-interactive voltage regulation, intelligent monitoring and unattended shutdown capability. Built-in isolation transformer with Faraday shield offers full isolation and complete common mode noise rejection. 1000VA power-handling capacity supports point-of-sale applications, computers, internetworking equipment and home theater systems during commercial power failures. Line-interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V back to normal 120V levels, reserving battery power for use during complete power failures. Built-in USB communications port works with PowerAlert Software and cabling to provide automatic unattended shutdown of connected network and PC applications.

Key Points

• 1000VA line-interactive UPS with Faraday-shielded, low-impedance isolation transformer delivers full isolation from potential damage and performance problems
• Provides immunity from EMI/RFI line noise in both normal and common modes. Delivers clean signal-reference ground, reducing data errors and audio/video distortion
• Automatic voltage regulation (AVR) automatically corrects incoming voltage to keep equipment working through low voltage (brownouts) as low as 81V and overvoltages as high as 143V without consuming battery power
• Supports loads up to 1000VA/700W
• Half-load runtime of 24 min. (500VA/350W); full load runtime of 8 min. (1000VA/700W)
• 5 diagnostic LEDs indicate AC present, on battery, voltage correction status, overload and battery low/replace
• Electrostatic discharge (ESD) resistance reduces potential static damage to connected electronics
• Built-in USB port and PowerAlert Software (free via web download) provide safe, unattended system shutdown during extended blackouts
• Built-in surge suppression (backed by $200,000 Ultimate Lifetime Insurance) safeguards connected equipment against damage
• SURGE VOLTAGE WITHSTAND CAPABILITY: ANSI/IEEE C62.41 Catagories A & B 6KV/200/500 amp 100Khz Ringwave and category B BiWave
• SURGE VOLTAGE ATTENUATION: N-G 2000:1, L-G 240:1, L-N 100:1
• INSERTION LOSS: 65 db N-G from 10Khz to 100Khz, 45 to 60 db L-G from 10Khz to 100Khz, 18 to 54 db L-N from 50Khz to 500 Khz
• 6 UPS-supported AC outlets; 6-ft. cord